Sanav MU-201 User Manual Download Page 17

Page: 17 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Set up Route for Data Transmission

This SMS command instructs the device decide to transmit GPS (GPRMC) positioning data to where in which protocol.

Please confirm the back-end server protocol type and corresponded URL or IP address (with port number if required)

before setup. There are 4 main protocols available for transmitting route setup:

1. HTTP: Hypertext Transfer Protocol. An internet browser based server protocol that usually has a specified URL (Uniform

Resource Locator).

2. TCP/IP: Transmission Control Protocol. An OSI Transport layer protocol that has more complex frame structure, higher

reliability but slower processing speed than UDP/IP.

3. UDP/IP: User Datagram Protocol. An OSI Transport layer protocol that has faster processing than TCP/IP but does not

guarantee data delivery.

4. SMS: The DEVICE will send GPS data by SMS message format to Cellular phone.

User can choose the route to transmit the data by HTTP/TCP/UDP protocol individually or with SMS message as a backup

route. Please refer to the following table for the route setup.

Setup Format: #

「

username

」

「

Password

」

「

Function Mode

」

「

0,2,4,6,7,8 or 9

」

Command: #username,0000,14,6*

SMS/ COTA Command

Description

Start sign.

Username

Default ID of the device.

If you have changed the user name, please use the updated one.

0000

Default password.

If you have changed the password, please use the updated one.

Mode 14 defines Transmission Route mode.

HTTP/SMS. Send data to HTTP server. If the route is not available, send data by SMS

message instead.

2 HTTP only. Send data to HTTP server. No SMS backup route.

4 SMS only. Send data by SMS message to cell phone. No backup route.

TCP/SMS. Send data to TCP server. If the route is not available, send data by SMS

message instead.

7 TCP Only. Send data to TCP server. No SMS backup route.

UDP/SMS. Send data to UDP server. If the route is not available, send data by SMS

message instead.

9 UDP Only. Send data to UDP server. No SMS backup route.

End sign.

Table: Transmission Route Setup Format Description

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands