MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
39
Vibration Sensitivity
User can define the sensitivity of Vibration by setting the following SMS/COTA command. There are 3 steps to define the
sensitivity from most sensitive to least sensitive.
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
,
「
on/off
」
,
「
show/hide
」
,
「
write
」
,
「
Sensitivity
」
,
「
Stop
Detection Buffer Time
」
*
Command: #username,0000,vs,on,show,write,1,180*
Table: Vibration Sensitivity Setup Format Description
Situation
Message Reply
Setup Succeeds
<OK>VS Write;VS SHOW,V3.937;76%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!, V3.937;76%
Table: Vibration Sensitivity Setup Response Description
SMS/ COTA Command
Description
#
Start sign.
username
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
vs
Mode ‘vs’ defines Vibration setup mode.
on
Enable the vibration.
on
off
Disable the vibration.
show Enable Vibration Status events report.
show
hide
Disable Vibration Status events report.
write
The write command for sensitivity setting.
Sensitivity Level:
1
Most vibration sensitivity
2
Less vibration sensitivity
1
3
Least vibration sensitivity
180
To define if the device stops for how long will be counted as “stop”. There are
60/120/180/240/300 second steps setting.
*
End sign.
