✤
✓
✓
19
✓
33
✤
LCD
✤
✤
✤
✓
✓
✓
50
°
C
122
°
F
0oC
320F
✓
✓
✤
✓
✓
✓
✓
✓
✤
✓
✓
✓
✓
✓
121
121
ENGLISH
Maintenance : Cleaning and
Maintaining the CAM
After using the CAM
✤
For the safekeeping of the CAM, follow these steps.
✓
Turn the CAM off.
✓
Remove the Battery Pack (Refer to page 19).
✓
Remove the Memory Card (Refer to page 33).
✤
To prevent any damage to the LCD monitor, do not apply excessive
force on its moving parts.
✤
Do not drop or in anyway shock the CAM.
✤
For prolonged use of the CAM, avoid using it in places subject to
excessive humidity or dust.
✤
Do not leave the CAM in places subject to:
✓
Excessive humidity, steam, soot or dust.
✓
Excessive shock or vibration.
✓
Extremely high (over 50°C or 122°F) or extremely low (under 0°C or
32°F) temperatures.
✓
Strong electromagnetic fields.
✓
Direct sunlight or in a closed car on a hot day.
✤
For the safe use of the Battery Pack, follow these.
✓
To conserve battery power, be sure to turn off the CAM when not in use.
✓
Battery consumption may vary depending on the condition of use.
Recording with many starts and stops,
frequent zooming, and recording in low temperatures will shorten actual
recording times.
✓
Dispose of used Battery Packs promptly. Do not dispose of them in fire.
✓
The Battery Pack will become warm during charging and use.
This is not a malfunction.
✓
The Battery Pack has a limited service life. If the period of use becomes
noticeably shorter with a normal charge,
the Battery Pack is at the end of its service life. Replace it with a new
Battery Pack.
✤
For the safe use of the Memory Card, follow these.
✓
The Memory Card should be stored away from heaters and other heat
sources. Avoid storing Memory Cards under direct sunlight and avoid
electromagnetic fields.
✓
Do not power off any devices while transferring data, as this may destroy
the data.
✓
Back up your image data often to a hard disk or other permanent
storage media.
✓
Format the Memory Card periodically.
✓
When formatting the Memory Card, format in the CAM.
