Samsung SCX-4x26 Series, User Manual

Page: 42 / 139

42 _
Scanning
10.
To scan from the default setting, press
Start
. Press the left/right button
until the setting you want appears then press OK.
11.
Scanning begins.
Setting scan information in Samsung Scan Manager.
You can find out about
Samsung Scan Manager
program information and
installed scan driver's condition. Also, you can change scan settings and
add or delete the folders where scanned documents to computer are save in
Samsung Scan Manager
program.
1.
Press
Start
>
Control Panel
>
Samsung Scan Manager
.
Samsung Scan Manager
Administration appears.
2.
Select the appropriate machine from the
Samsung Scan Manager
.
3.
Press
Property
.
4. Set Scan Button
allows you to change the saving destination and scan
settings, add or delete application program and format files.
You can change the scanning machine by using
Change Port
. (Local or
Network)
5.
Press
OK
after setting is done.
SCANNING BY A NETWORK CONNECTION
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network.
Preparing for network scanning
Before using your machine’s network scanning features, you need to
configure the following settings, depending on your scan destination:
•
Register as an authorized user for scanning to email.
• Set up the SMTP server for scanning to email
User authentication for network scanning
To send a scanned imaged image via an email or network, you must
register authorized local or network users using SyncThru™ Web
Service.
•
If user authentication has been activated, only authorized local users
or on the DB server can send scanned data to the network (email,
Network).
• For network scanning using the authentication feature, you must
register the network or local authentication configuration using the
SyncThru™ Web Service.
• User authentication has 3 options: none (Default), network
authentication, and local authentication.
Registering local authorized users
1.
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2.
Click
Machine Settings
.
3.
Select
Local Authentication
on the
General Setup
of the
User
Authentication
web page.
4.
Click
Add
.
5.
Select an index number corresponding to the location for storing the
entry, from 1 to 50.
6.
Enter your name, auth ID, password, e-mail address and phone
number.
You need to enter the registered user ID and password in the
machine when you start scanning to email from the control panel.
7.
Click
Apply
.
Register authorized network users
1.
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2.
Click
Machine Settings
.
3.
Select
Network Authentication
on the
General Setup
of
User
Authentication
web page.
4.
Click
Apply
and
OK
.
5.
Select the
Authentication Type
that you prefer.
6.
Configure the values for each feature, as follows.
7.
Click
Apply
.
Setting up an e-mail account
To scan and send an image as an email attachment, you need to set up
network parameters using SyncThru™ Web Service.
1.
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2.
Click
Machine Settings
and
E-mail Setup
.
3.
Select
IP Address
or
Host Name
.
4.
Enter the IP address in dotted decimal notation or as a host name.
5.
Enter the server port number, from 1 to 65535.
The default port number is 25.
6.
Check the box next to
SMTP Requires Authentication
to require
authentication.
7.
Enter the SMTP server login name and password.
8.
Click
Apply
.
• Scanned image is saved in computer's
My Documents
>
My
Pictures
>
Samsung
folder.
• You can use Tawin driver to scan quickly in
Samsung Scan
Manager
program.
• You can also scan by pressing Window's
Start
>
Control
Panel
>
Samsung Scan Manager
>
Quick Scan
.
Scan Manager program can only be used in the Window and
Macintosh system. If you use the Macintosh, See Software section.
You can open
Samsung Scan Manager
by pressing the
Smart
Panel
icon's right in the window task bar.
If the authentication method of SMTP server is
POP3beforeSMTP, check the box next to
SMTP Requires POP3
Before SMTP Authentication
.
a.
Enter the IP address in dotted decimal notation or as a host
name.
b.
Enter the server port number, from 1 to 65535. The default
port number is 25.