Samsung SCX-4x26 Series User Manual Download Page 62

Page: 62 / 139

62 _

Maintenance

Clearing the Toner Empty message

When the

Toner Empty

message appears you can configure not to see this

message again not to disturb you.

Press

Menu

until

System Setup

appears on the bottom line of the

display and press

Press the Scroll buttons until

Maintenance

appears and press

Press the Scroll buttons until

CLR Empty Msg.

appears and press

Select

and press

Now the

Toner Empty

message does not appear but the

Replace

Toner

message will remain for reminding you that the new cartridge

needs to be installed for quality.

MAINTENANCE PARTS

To avoid print quality and paper feed problems resulting from worn parts,

and to maintain your machine in top working condition the following

condition, the following items will need to be replaced after the specified

number of pages, or when the life span of each item has expired.

We highly recommend that this maintenance be performed by an authorized

service provider, dealer or the retailer where you bought the machine. The

warranty does not cover the replacement of the maintenance parts after

their lifespan.

Checking replaceables

If you experience frequent paper jams or printing problems, check the

number of pages the machine has printed or scanned. Replace the

corresponding parts, if necessary.

Press

Menu

until

System Setup

appears on the bottom line of the

display and press

Press the left/right arrow until

Maintenance

appears and press

Press the left/right arrow until

Supplies Life

appears and press

Press the left/right arrow until the item you want appears and press

•

Supplies Info:

Prints the supply information page.

•

Total:

Displays the total number of pages printed.

•

ADF Scan:

Displays the number of pages scanned using the ADF.

•

Platen Scan:

Displays the number of pages scanned using the

scanner glass.

•

Transfer Belt:

Displays the number of pages printed each item.

If you selected to print a supply information page, press

to confirm.

Press

Stop/Clear

to return to ready mode.

Replacing the ADF rubber pad

You will need to replace the ADF rubber pad when there seems to be a

consistent problem with paper pickup or when its specified yield is reached.

Open the ADF cover.

Rotate the bushing on the right end of the ADF roller toward the ADF

and remove the roller from the slot.

Remove the ADF rubber pad from the ADF, as shown.

Insert a new ADF rubber pad into place.

•

Once you have selected

, this setting will be permanently

written to the memory of the toner cartridge, and this menu will be

disappeared from the

Maintenance

menu.

•

You can keep printing but the quality cannot be guaranteed, and

the product support is no longer provided.

ITEMS

YIELD (AVERAGE)

Fuser unit

Approx. 50,000 pages

ADF rubber pad

Approx. 20,000 pages

ADF feed roller

Approx. 20,000 pages

Pick-up roller

Approx. 50,000 pages

Transfer roller

Approx. 50,000 pages

Bushing

ADF roller

ADF rubber pad

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands