Samsung SCX-4x26 Series User Manual Download Page 79

Page: 79 / 139

79 _

Ordering supplies and accessories

ordering supplies and accessories

This chapter provides information on purchasing cartridges and accessories available for your machine.

This chapter includes:

•

Supplies

•

Accessories

•

How to purchase

SUPPLIES

When the toner runs out, you can order the following type of toner cartridge

for your machine:

ACCESSORIES

You can purchase and install accessories to enhance your machine’s

performance and capacity.

HOW TO PURCHASE

To order Samsung-authorized supplies or accessories, contact your local

Samsung dealer or the retailer where you purchased your machine, or visit

www.samsung.com/supplies

and select your country/region to obtain

information on calling for technical support.

The optional parts or features may differ by countries. Contact your

sales representatives whether the part you want is available in your

country.

TYPE

AVERAGE YIELD

a.Declared yield value in accordance with ISO/IEC 19752.

PART NUMBER

Standard yield
toner cartridge

Average cartridge yield 2,000

standard pages.

MLT-D209S

Region A

MLT-D2092S

Region A

: Albania, Austria, Belgium, Bosnia, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Finland, France, Germany,
Greece, Hungary, Italy, Macedonia, Netherlands, Norway, Poland,
Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, UK.

High yield toner
cartridge

Average cartridge yield 5,000

standard pages.

MLT-D209L

Region A

MLT-D2092L

When purchasing new print cartridges or other supplies, these must

be purchased in the same country where the machine was

purchased. Otherwise, print cartridges or other supplies will be

incompatible with your machine, as configurations of print cartridges

and other supplies vary, depending on the specific country.

ACCESSORY

DESCRIPTION

PART NUMBER

Memory module

Extends your

machine’s memory

capacity.

•

CLP-MEM201: 128 MB

•

CLP-MEM202: 256 MB

Optional tray 2

If you are

experiencing

frequent paper

supply problems,

you can attach an

additional 250 sheet

tray. You can print

documents in

various sizes and

types of print

materials.

SCX-S4824A

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands