Samsung SCX-4x26 Series User Manual Download Page 63

Page: 63 / 139

Maintenance

_ 63

Align the left end of the ADF roller with the slot and push the right end of

the roller into the right slot. Rotate the bushing on the right end of the

roller toward the document input tray.

Close the ADF cover.

MANAGING YOUR MACHINE FROM THE
WEBSITE

If you have connected your machine to a network and set up TCP/IP

network parameters correctly, you can manage the machine via Samsung’s

SyncThru™ Web Service

, an embedded web server. Use

SyncThru™

Web Service

to:

•

View the machine’s device information and check its current status.

•

Change TCP/IP parameters and set up other network parameters.

•

Change the printer properties.

•

Set the machine to send email notifications to let you know the

machine’s status.

•

Get support for using the machine.

To access SyncThru™ Web Service:

Start a web browser, such as Internet Explorer, from Windows.

Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address

field and press the

Enter

key or click

Your machine’s embedded website opens.

CHECKING THE MACHINE’S SERIAL NUMBER

When you call for service or register as a user on the Samsung website, the

machine’s serial number may be required.

You can check the serial number by taking the following steps:

Press

Menu

until

System Setup

appears on the bottom line of the

display and press

Press the left/right arrow until

Maintenance

appears and press

Press the left/right arrow until

Serial Number

appears and press

Check your machine’s serial number.

Press

Stop/Clear

to return to ready mode.

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands