Samsung SCX-4x26 Series User Manual Download Page 56

Page: 56 / 139

56 _

Using USB flash memory

MANAGING USB MEMORY

You can delete image files stored on a USB memory device one by one or

all at once by reformatting the device.

Deleting an image file

Insert the USB memory device into the USB memory port on your

machine.

Press

Direct USB

Press the left/right arrow until

File Manage

appears and press

Press

when

Delete

appears.

Press the left/right arrow until the folder or file you want appears and

press

If you selected a file, the display shows the size of the file for about

2 seconds. Go to the next step.

If you selected a folder, press the left/right arrow until the file you want to

delete appears and press

Press

when

Yes

appears to confirm your selection.

Press

Stop/Clear

to return to ready mode.

Formatting a USB memory device

Insert the USB memory device into the USB memory port on your

machine.

Press

Direct USB

Press the left/right arrow until

File Manage

appears and press

Press the left/right arrow until

Format

appears and press

Press

when

Yes

appears to confirm your selection.

Press

Stop/Clear

to return to ready mode.

Viewing the USB memory status

You can check the amount of memory space available for scanning and

saving documents.

Insert the USB memory device into the USB memory port on your

machine.

Press

Direct USB

Press the left/right arrow until

Check Space

appears and press

The available memory space appears on the display.

Press

Stop/Clear

to return to the ready mode.

After deleting files or reformatting a USB memory device, files cannot

be restored. Therefore, confirm that you no longer need the data

before deleting it.

If you see

in the front of a folder name, there are one or more

files or folders in the selected folder.

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands