Samsung SCX-4x26 Series User Manual Download Page 18

Page: 18 / 139

18 _

Introduction

CONTROL PANEL OVERVIEW

ID Copy

You can copy both sides of the ID Card like a

driver’s license to a single side of paper. See

page 38.

Direct USB

Allows you to directly print files stored on a USB

Memory device when it is inserted into the USB

memory port on the front of your machine. See

page 54.

Display

Shows the current status and prompts during an

operation.

Status

Shows the status of your machine. See page 19.

Fax

Activates Fax mode.

Copy

Activates Copy mode.

Scan/Email

Activates Scan mode.

Menu

Enters Menu mode and scrolls through the

available menus.

Left/right arrow

Scroll through the options available in the

selected menu, and increase or decrease values.

Confirms the selection on the screen.

Back

Sends you back to the upper menu level.

Number keypad

Dials a number or enters alphanumeric

characters. See page 28.

Address Book

Allows you to store frequently used fax numbers

in memory or search for stored fax numbers or

email addresses.

Redial/Pause

In ready mode, redials the last number, or in Edit

mode, inserts a pause into a fax number.

On Hook Dial

Engages the telephone line.

Stop/Clear

Stops an operation at any time. In ready mode,

clears/cancels the copy options, such as the

darkness, the document type setting, the copy

size, and the number of copies.

Start

Starts a job.

•

All illustrations on this user’s guide may differ from your machine

depending on its options or models.

•

The surface of the output tray may become hot if you print a large

number of pages at once. Make sure that you do not touch the

surface, and do not allow children near it.

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands