Samsung SCX-4x26 Series User Manual Download Page 69

Page: 69 / 139

Troubleshooting

_ 69

Memory Full

The memory is full.

Delete unnecessary fax

jobs and retransmit after

more memory becomes

available. Alternatively,

split the transmission into

more than one operation.

Not Assigned

The speed button or

speed dial number

you tried to use has

no number assigned

to it.

Enter the number

manually using the

number keypad or store

the number or address.

NonSAMSUNG
Toner

The toner cartridge is

not a Samsung-

genuine cartridge.

Press

to toggle

the message to

Stop

Continue

Stop

You can select either

Stop

Continue

with the left/

right arrow.

If you select

Stop

pressing

on the control

panel, the machine stops

printing. If you select

Continue

, the machine

keeps printing, but the

quality cannot be

guaranteed.

If you do not select any,

the machine will work as

Stop

is selected.

Replace the

corresponding toner

cartridge with a Samsung-

genuine cartridge. See

page 61.

One Page is
Too Large

Single page data

exceeds the

configured mail size.

Reduce the resolution and

try again.

Operation Not
Assigned

You are in the

Add

Page

Cancel Job

operation, but there

are no jobs stored.

Check the display to see if

there are any scheduled

jobs.

Out-Bin Full|
Open/Close Door

The output tray of the

machine is full of

paper.

Remove paper. Open the

front cover and than close

it.

Paper Jam 0
Open/Close Door

Paper has jammed in

the feeding area of the

tray.

Clear the jam. See page

65.

Paper Jam 1
Open/Close Door

Paper has jammed
inside the machine.

Clear the jam. See page

66.

Paper Jam 2
Check Inside

Special print media
has jammed in the
paper exit area.

Clear the jam. See page

66.

Refilled Toner

The toner cartridge

you have installed is

not genuine or refilled.

The print quality may get

poor if the refilled toner

cartridge is installed, since

its characteristics may

significantly differ from the

genuine.

We recommend Samsung-

genuine toner cartridge.

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Replace Toner

This message

appears between

Toner Empty

and

Toner Low

status.

Replace the toner

cartridge with a new one.

See page 61.

Replace
[xxx] Soon

The life of the part

expires soon.

See page 62 and call for

service.

Retry Redial?

The machine is

waiting for a specified

time interval to redial

a previously busy

station.

You can press

immediately redial, or

Stop/Clear

to cancel the

redial operation.

Scanner locked

The scanner module

is locked

Unlock the scanner and

press

Stop/Clear

Send Error
(AUTH)

There is a problem in

SMTP authentication.

Configure the

authentication setting.

Send Error
(DNS)

There is a problem in

DNS.

Configure the DNS setting.

Send Error
(POP3)

There is a problem in

POP3.

Configure the POP3

setting.

Send Error
(SMTP)

There is a problem in

SMTP.

Change to the available

server.

Send Error
(Wrong Config)

There is a problem on

the network interface

card.

Configure your network

interface card correctly.

Toner Empty

A toner cartridge has

almost reached its

estimated cartridge

life.

Samsung

does not

recommend

using non-

genuine Samsung

toner cartridge such

as refilled or

remanufactured.

Samsung cannot

guarantee non-

genuine Samsung

toner cartridge's

quality. Service or

repair required as a

result of using non-

genuine Samsung

toner cartridges will

not be covered under

the machine warranty.

You can choose either

Stop

Continue

shown on the control

panel. If you select

Stop

the printer stops printing

and you cannot print any

more without changing the

cartrdige. If you select

Continue

, the printer

keeps printing but the

printing quality cannot be

guaranteed.

Replace the toner

cartridge for the best print

quality when this message

appears. Using a cartridge

beyond this stage can

result in printing quality

issues. (See page 61.)

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands