Samsung SCX-4x26 Series User Manual Download Page 105

Page: 105 / 139

Installing Printer Software in Windows

OTE

: If your printer is not already connected to the

computer, the following window will appear.

• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click

Next, and No on the following screen. Then the installation

will start and a test page will not be printed at the end of the

installation.

• The reinstallation window that appears in this User’s

Guide may differ depending on the printer and

interface in use.

Select the components you want to reinstall and click
Next

If you installed the printer software for local printing
and you select your printer driver name, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click

Next

b. If the test page prints out correctly, click Yes.

If it doesn’t, click No to reprint it.

When the reinstallation is done, click Finish.

Removing Printer Software

Start Windows.

From the Start menu select Programs or All Programs

→

your printer driver name

→

Maintenance.

Select Remove and click Next.
You will see a component list so that you can remove any
item individually.

Select the components you want to remove and then click
Next.

When your computer asks you to confirm your selection,
click Yes.
The selected driver and all of its components are removed
from your computer.

After the software is removed, click Finish.

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands