Samsung SCX-4x26 Series User Manual Download Page 58

Page: 58 / 139

58 _

Maintenance

CLEARING MEMORY

You can selectively clear information stored in your machine’s memory.

Press

Menu

until

System Setup

appears on the bottom line of the

display and press

Press the left/right arrow until

Clear Setting

appears and press

Press the left/right arrow until the item you want to clear appears.

Press

when

Yes

appears.

Press

again to confirm clearing.

Repeat steps 3 through 5 to clear another item.

Press

Stop/Clear

to return to ready mode.

CLEANING YOUR MACHINE

To maintain print and scan quality, follow the cleaning procedures below

each time the toner cartridge is replaced or if print and scan quality

problems occur.

Cleaning the outside

Clean the cabinet of the machine with a soft lint-free cloth. You can dampen

the cloth slightly with water, but be careful not to let any water drip onto or

into the machine.

Cleaning the inside

During the printing process, paper, toner, and dust particles can accumulate

inside the machine. This buildup can cause print quality problems, such as

toner specks or smearing. Cleaning the inside of the machine clears or

reduces these problems.

Turn the machine off and unplug the power cord. Wait for the machine to

cool down.

Completely open the front cover.

Before clearing the memory, make sure that all fax jobs have been

completed, or you will lose those jobs.

Some menus may not appear in the display depending on options or

models. If so, it is not applicable to your machine.

OPTIONS

DESCRIPTION

All Settings

Clears all of the data stored in memory and resets all

of your settings to the factory default.

Fax Setup

Restores all of the fax options to the factory default.

Copy Setup

Restores all of the copy options to the factory

default.

Scan Setup

Restores all of the scan options to the factory

default.

System Setup

Restores all of the system options to the factory

default.

Network Setup

Restores all of the network options to the factory

default.

Address Book

Clears all of the fax number and email address

entries stored in memory.

Sent Report

Clears all records of sent faxes and emails.

Fax RCV Report

Clears all records of received faxes.

•

Cleaning the cabinet of the machine with cleaning materials

containing large amounts of alcohol, solvent, or other strong

substances can discolor or distort the cabinet.

•

If your machine or its surrounding is contaminated with toner, we

recommend you to use cloth or tissue dampened with water to

clean it. If you use a vacuum cleaner, toner blown into the air may

be harmful.

•

Do not touch the green surface, the OPC drum or the front of the

toner cartridge, with your hands or any other material. Use the

handle on each cartridge in order to avoid touching this area.

•

Be careful not to scratch the surface of the paper transfer belt.

•

If you leave the front cover open for more than a few minutes, the

OPC drum can be exposed to light. This will cause damage to the

OPC drum. Close the front cover should the installation need to

be halted for any reason.

Summary of Contents for SCX-4x26 Series












































































































































Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands

Samsung SCX-4x26 Series, User Manual

Search results

Summary of Contents for SCX-4x26 Series

Reviews:

Related manuals for SCX-4x26 Series

Brands by name

Popular brands