manualshive.com logo in svg

Samsung Multifunction MultiXpress X322 Series, User Manual, Page: 402 / 432

Share
Download
Samsung Multifunction MultiXpress X322 Series User Manual Download Page 402

Regulatory information

402

16. Appendix

12 

Radio frequency emissions

FCC information to the user

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

•

This device may not cause harmful interference, and

•

This device must accept any interference received, including interference 
that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

•

Consult the dealer or experienced radio TV technician for help.

 

Change or modifications not expressly approved by the manufacturer 
responsible for compliance could void the user's authority to operate the 
equipment.

 

Canadian radio interference regulations

This digital apparatus does not exceed the Class A limits for radio noise 

emissions from digital apparatus as set out in the interference-causing 

equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and 

Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques 

applicables aux appareils numériques de Classe A prescrites dans la norme sur 

le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie 

et Sciences Canada.

Summary of Contents for Multifunction MultiXpress X322 Series

















































































































































































































































































































































































































































Reviews:

No comments