Samsung ML-2251NP - Network Business Laser Printer, User Manual

Page: 139 / 203

S
OLVING PROBLEMS
6. 24
Common Linux Problems
Problem Possible Cause and Solution
I can’t change settings in
the configuration tool. You need to have administrator privileges to be able to affect
global settings.
I am using the KDE
desktop but the
configuration tool and LLPR
won’t start. Maybe you do not have the GTK libraries installed. These
usually come with most Linux distributions, but you may have
to install them manually. Refer to your distribution’s
installation manual for more details about installing additional
packages.
I just installed this
package but can’t find
entries in the KDE/Gnome
menus. Some versions of the KDE or GNOME desktop environments
may require that you restart your session for the changes to
take effect.
I get a “Some options are
not selected” error
message while editing the
printer settings. Some printers have conflicting settings, meaning that some
settings for two options can’t be selected at the same time.
When you change a setting and the Printer Package detects
such a conflict, the conflicting option is changed to a “No
Choice” value, and you have to choose an option that does
not conflict before being able to submit the changes.
I can’t make a printer the
system default. In some conditions, it may not be possible to change the
default queue. This happens with some variants of LPRng,
especially on recent RedHat systems that use the “printconf”
database of queues.
When using printconf, the /etc/printcap file is automatically
refreshed from the database of printers managed by the
system (usually through the “printtool” command), and the
queues in /etc/printcap.local are appended to the resulting
file. Since the default queue in LPRng is defined as the first
queue in /etc/printcap, it is not possible for the Linux Printer
Package to change the default when some queues have
otherwise been defined using printtool.
LPD systems identify the default queue as the one named “lp”.
Thus, if there is already a queue by this name, and if it
doesn’t have any alias, you won’t be able to change the
default. To work around this, you can either delete the queue
or rename it by manually editing the /etc/printcap file.
The N-up setting does not
work correctly for some of
my documents. The N-up feature is achieved through post-processing of the
PostScript data that is being sent to the printing system.
However, such post-processing can only be adequately
achieved if the PostScript data conforms to the Adobe
Document Structuting Conventions. Problems may arise when
using N-up and other features relying on post-processing if
the document being printed isn’t compliant.