Samsung ML-2251NP - Network Business Laser Printer, User Manual

Page: 194 / 203

S
PECIFICATIONS
F. 5
F
Guidelines for Using Paper
For best results, use conventional 75 g/m
2
(20 lb) paper. Ensure
that the paper is of good quality, and free of cuts, nicks, tears,
spots, loose particles, dust, wrinkles, voids, and curled or bent
edges.
If you are unsure of what type of paper you are loading, such as
bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming, or even damage to the printer.
N
OTES
:
• Do not use letterhead paper printed with low-temperature inks,
such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the paper.
Insure that any coloured paper or preprinted forms use inks that
are compatible with this fusing temperature (205 °C or 400 °F
for 0.1 second).
Symptom
Problem with
Paper
Solution
Poor print quality
or toner adhesion,
problems with
feeding
Too moist, too
rough, too
smooth, or
embossed; faulty
paper lot
Try another kind of
paper, between 100 ~
250 Sheffield, 4 ~ 5 %
moisture content.
Dropout,
jamming, curl
Stored improperly
Store paper flat in its
moisture-proof
wrapping.
Increased gray
background
shading/printer
wear
Too heavy
Use lighter paper, open
the rear output tray.
Excessive curl
problems with
feeding
Too moist, wrong
grain direction, or
short-grain
construction
• Open the rear output
tray.
• Use long-grain paper.
Jamming, damage
to printer Cutouts or
perforations Do not use paper with
cutouts or perforations.
Problems with
feeding
Ragged edges Use good quality paper.