English -
21
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENTOUT(Y,P
B
,P
R
) jacks on
DVD Recorder and COMPONENTIN(Y,P
B
,P
R
) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUTjacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 21 to 22).
3. After connecting, refer to the page 35 to 36.
●
You will enjoy high quality and accurate color
reproduction images.
COMPONENT
Pr
Pb
Y
2
1
green
blue
red
green
blue
red
■
Make sure that the color coded
connections match. The Y, P
B
, P
R
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
■
Progressive setting is only available when
the Video Out is set to Component.
(See page 36)
NOTE
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
●
Case 1 :
Connecting to your TV
●
Case 2 :
Connecting to a stereo amplifier with AV
output jacks
●
Case 3 :
Connecting to an AV amplifier with a
digital output jack
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Other type of connecting
the Audio output cable
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
yellow
white
red
yellow
white
red
C
onnecting & Setting Up
00786A-R120-XEH-Eng_18~41 5/13/05 8:40 AM Page 21
