Tel: 886.909 602 109 Email: [email protected]
97
· [IQ Capture Off On]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→
[IQ Capture Off On] to enable or disable the IQ capture function.
· [Start Capture]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→ [Start
Capture] to start IQ capture.
· [Capture time]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→
[Capture Time] to set the IQ capture time.
· [Capture Mode]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→
[Capture Mode] to enable the single or continuous IQ capture. In the single
mode, the data will be captured once only. In the continuous mode, the
data will be captured once after each sweeping of the stroke, and
capturing will not be stopped until otherwise set by the user.
· [Sample rate]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→ [Sample
Rate] to set the sample rate of IQ capture.
· [Triggering]:
Press [Measure]→ [More 1/2]→ [IQ Capture]→
[Triggering] to set the triggering mode, including [Free Run] and
[External]. In the [External] mode, [Slope] and [Delay] can be set.
· [Save Name IQCapture]:
Press [Measure]→ [More 1/2]→ [IQ
Capture]→ [Save Name] to save the captured data.
