Tel: 886.909 602 109 Email: [email protected]
185
12 ShortCut menu
·[Center Freq]:
press [ShortCut]→[Center Freq], press [Freq]→[Center
Freq], to set the center frequency by using the number key on front panel,
[GHz], [MHz], [kHz] or [Hz] or[↑]or[↓]key and spinning wheel in frequency
unit menu.
·[Span]:
press [ShortCut]→[Span],press [Freq]→[Span], to activate the
span sub-menu by using number key, frequency unit or [↑]or [↓]key and
spinning wheel.
·[Tune Listen Off On]:
press [ShortCut]→[Tune&Listen Off On], to
activate or deactivate the tune listen function.
·[IQ Capture Off On]:
press [ShortCut]→[IQ Capture Off On], to activate
or deactivate IQ Capture function.
·[Start Capture]:
press [ShortCut]→[Start Capture], to start IQ Capture.
·[Peak Search]:
press [ShortCut]→[Peak Search], to set the current
marker at the maximum peak point of measuring trace and indicate the
frequency and amplitude of the marker.
·[Marker→Center Freq]:
press [ShortCut]→[Marker→Center Freq], to
set the center frequency as marker frequency. This function can quickly
move the signal to the center of screen.
·[List Off On]:
press[ShortCut]→[List Off On], to open or close the signal
list.
13 File menu
Please refer to the file menu description under spectral analysis mode.
