Tel: 886.909 602 109 Email: [email protected]
94
· [ACPR Off On]:
Press [Measure]→ [ACPR]→ [ACPR Off On] to enable
or disable the ACPR measurement function.
· [Center frequency]:
Press [Measure]→ [ACPR]→ [Center Freq] and set
the center frequency with number keys.
· [Main Ch BW]:
Press [Measure]→ [ACPR]→ [Main Ch BW] and set the
main channel bandwidth with number keys.
· [Adjacent Ch BW]:
Press [Measure]→ [ACPR]→ [Adj Ch BW] and set
the adjacent channel bandwidth with number keys.
· [Ch Spacing]:
Press [Measure]→ [ACPR]→ [Ch Spacing] and set the
channel spacing with number keys.
· [Limit Test Off On]:
Press [Measure]→ [ACPR]→ [Limit Test Off On] to
enable or disable the upper and lower limit test of the adjacent channel
power.
· [Upper Limit]:
Press [Measure]→ [ACPR]→ [Upper Limit] to set the
upper limit of the power of the adjacent channel test.
· [Lower Limit]:
Press [Measure]→ [ACPR]→ [Lower Limit] to set the
lower limit of the power of the adjacent channel test.
[Special note]: If ACPR exceeds the set limit in the limit test, the
screen background will turn red as the mark.
