Tel: 886.909 602 109 Email: [email protected]
103
·[Repeat Type]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Distance Time]→[Repeat Type], to set the repeat type.
·[Repeat Time]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Distance Time]→[Repeat Time], to set the interval time between
acquisitions. Only valid when the type is set to Time.
·[Repeat Dist]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Distance Time]→[Repeat Dist], to set the interval distance between
acquisitions. Only valid when the type is set to Distance.
·[Delete All Points]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Distance Time]→[Delete All Points], to delete all collected points on the
map.
·[Excellent:
≥
0.0dBm]:
press [Measure]→[More 1 of 2]→[Coverage Map]
→[Measurement Setup]→[RSSI]→[Excellent:
≥
0.0dBm], to set the color
when the measured signal is greater than this value.
·[Very good:
≥
-20.0dBm]:
press [Measure]→[More 1 of 2]→[Coverage
Map]→[Measurement Setup]→[RSSI]→[Very good:
≥
-20.0dBm], to set
the color when the measured signal is greater than this value.
·[Good:
≥-4
0.0dBm]:
press [Measure]→[More 1 of 2]→[Coverage Map]
→[Measurement Setup]→[RSSI]→[Good:
≥
-40.0dBm], to set the color
when the measured signal is greater than this value.
·[Fair:
≥-6
0.0dBm]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[RSSI]→[Fair:
≥
-60.0dBm], to set the color when
the measured signal is greater than this value.
·[Poor:
<
-60.0dBm]:
press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[RSSI]→[Poor:
<
-60.0dBm], to set the color when
the measured signal is lower than this value.
