Salicru CV30, User Manual, Page: 28 / 140

28 - 140 Fault Tracking
5 Function Parameters
5.1 Function Parameters description
The function parameters of CV30 inverters have been divided into 30 groups (P00~P29) according to the
function, of which P18~P28 are reserved. Each function group contains certain function codes applying
3-level menus. For example, “P08.08” means the eighth function code in the P8 group function, P29 group is
factory reserved, and users are forbidden to access these parameters.
For the convenience of function codes setting, the function group number corresponds to the first level menu,
the function code corresponds to the second level menu and the function code’s value corresponds to the
third level menu. CV30 includes the following function groups:

P00: Basic Function Group

P01: Start-up and stop control

P02: Motor data

P03: Vector Control

P04: SVPWM Control

P05: Input Terminals

P06: Output Terminals

P07: Human-mafchine interface

P08: Enhanced Function

P09: PID Control

P10: Simple PLC and Multi-step speed control

P11: Protective parameters

P13: Control parameters of Short circuit braking

P14: Serial communication

P17: Monitoring function
Below is the instruction of the function lists:
The first column “Function code”: codes of function parameter group and parameters
The second column “Name”: full name of function parameters
The third column “Detailed instruction of parameters”: Detailed instruction of the function parameters
The fourth column “Default value”: the original factory set value of the function parameter
The fifth column “Modify”: the modifying character of function codes (the parameters can be modified or not
and the modifying conditions),below is the instruction:
“
○
”: means the set value of the parameter can be modified on stop and running state
；
“ ◎ ”: means the set value of the parameter can not be modified on the running state ；
“
●
”: means the value of the parameter is the real detection value which can not be modified.