![background image](http://html1.mh-extra.com/html/ryobi/rlt30cesc/rlt30cesc_user-manual_1507187018.webp)
15
English(Original instructions)
Thank you for buying a Ryobi trimmer.
Your new trimmer has been engineered and manu-
factured to Ryobi’s high standard for dependability, ease
of operation, and operator safety. Properly cared for, it will
give you years of rugged, trouble-free performance.
INTENDED USE
The product is only intended for use outdoors in a well
ventilated area.
The product is intended for cutting long grass, pulpy
weed and similar vegetation at or about ground level. The
product should not be used to cut or trim hedges, bushes
or other vegetation where the cutting plane is not parallel
to the ground surface.
WARNING
To reduce the risk of injury, the user must read
and understand the operator’s manual.
WARNING
Do not attempt to operate the product until you
have read thoroughly and understood completely
all instructions, safety rules etc contained in
this manual. Failure to comply may result in
accidents involving fire, electric shock or serious
personal injury. Save operator’s manual and
review frequently for continuing safe operation,
and instructing others who may use this tool.
READ ALL INSTRUCTIONS.
GENERAL SAFETY RULES
■ For safe operation, read and understand all instructions
before using the product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
■ Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
■ Do not allow children or untrained individuals to use
the product.
■ Never start or run the engine in a closed or poorly
ventilated area; breathing exhaust fumes can kill.
■ Clear the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the bump head.
■ Wear full eye and hearing protection while operating
the product.
■ Wear heavy long pants, boots, and gloves. Do not
wear loose fitting clothing, short pants, jewellery of any
kind, or use with bare feet.
■ Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
■ Keep all bystanders, children, and pets at least 15 m
away.
■ Do not operate the product when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
■ Do not operate in poor lighting.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
■ Keep all parts of your body away from any moving
part.
■ Do not touch area around the muffler or cylinder of the
product, these parts get hot from operation.
■ Always stop the engine and remove the spark plug
wire before making any adjustments or repairs except
for carburetor adjustments.
■ Inspect the product before each use for loose
fasteners, fuel leaks, etc. Replace any damaged parts
before use.
■ It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud’s
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
diet, smoking and work practices are all thought to
contribute to the development of these symptoms.
It is presently unknown what, if any, vibrations or
extent of exposure may contribute to the condition.
There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When
operating the product wear gloves to keep the hands
and wrists warm. It is reported that cold weather is a
major factor contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see your
physician about these symptoms.
■ Keep the tool well maintained, fasteners tightened and
worn parts replaced.
■ Mix and store fuel in a container approved for fuel.
■ Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m away from
Summary of Contents for RLT30CESC
