RUTHMANN 27409 Operating And Maintenance Instructions Manual Download Page 22 | Manualshive

Page: 22 / 261

background image

0

General

0-2

RUTHMANN-Steiger

®

TB270

BA.GB.12-27409-05-07-FTA-jr

0.1

Preface

This  manual  contains  important  information  regarding  operation,  mainte-
nance  and  care  for  the  Ruthmann-Steiger.  Regarding  operation,  mainte-
nance  and  care  of  the  carrier  chassis  we  refer  you  to  the  Operating  and
Maintenance Instructions of the chassis manufacturer.

Observing the above-mentioned documentation helps you to work with the
Ruthmann-Steiger  safely,  in  a  proper  way  and  efficiently.  Apart  from  this
you  avoid  damages,  reduce  repair  costs  and  fault  times  and  increase  the
reliability and duration of live of the Ruthmann-Steiger.
It  is  up  to  you  to  keep  the  Ruthmann-Steiger  ready  for  use  and  safe  by
reading  and  observing  our  manual,  observing  our  instructions  and  provid-
ing regular maintenance and care.
The  manual  must  be  available  at  the Ruthmann-Steiger  any time.  In case
other people (apart from you) work with or at the Ruthmann-Steiger, make
sure that these people are trained and read and study this manual.

In general:

The operator of the Ruthmann-Steiger is responsible for other persons, an-
imals and things within the area of danger of the Ruthmann-Steiger not to
be injured/damaged.

The Ruthmann-Steiger was designed and build in accordance with

basical safety and health regulations.

Note

As operator you have to ensure that the Ruthmann-

Steiger still does full fill the requirements in condition

according to the operational safety regulations and/or

similar, specific local regulations.

You must take all measurements in accordance with the state of the art to
ensure that the operating staff gets an aerial platform with which the safety
and health protection is granted in case of proper use.

You are responsible for a regular check of the condition of the Ruth-

mann-Steiger by an expert and to let it have put down in writing. We

recommend to use our INSPECTION-SERVICE and to let carry out ac-

cording to BGR 500

– 2.10 „Operation of Aerial Platforms” a yearly in-

spection by the Ruthmann-

Service in accordance with BGG 945 „In-

spection of Aerial Platforms”.

In this way you demonstrate your operat-

«
...
20
21
22
23
24
...
»

Summary of Contents for 27409






































































































































































































































































Reviews:

No comments

Related manuals for 27409

Brand: Sabaj Pages: 12

Brand: SAI Pages: 16

Brand: Panamax Pages: 16

Brand: Paton Pages: 31

Brand: RAM Pages: 32

OneFlow OFTWH-R

Brand: Watts Pages: 8

Brand: YASKAWA SIEMENS Pages: 373

Brand: HALDER Pages: 7

Brand: Jefferson Pages: 24

Brand: WeldKing Pages: 31

Productivity 2000 P2-08NAS

Brand: Automationdirect.com Pages: 4

Brand: Sure Heat Pages: 10

Brand: Air Liquide Pages: 66

Brand: Bear Pages: 21

Brand: First Power Pages: 16

Brand: Hallins Pages: 17

Brand: Longrun Pages: 13

Brand: YASKAWA Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands