RUTHMANN 27409 Operating And Maintenance Instructions Manual Download Page 110

Page: 110 / 261

Taking into operation

5-6

RUTHMANN-Steiger

TB270

BA.GB.12-27409-05-07-FTA-jr



Traffic sign (building site)



Traffic installations, as e.g.:



Warning lights,



Road closing devices, as e.g.



Barriers,



leading/warning bars),



leading cones l,



mobile closing panel (with or without warning flag)



mobile closing panel with blinking arrow (with or with-

out warning flag).



Safety guards

The securing of working sites and the use of road closing devices is effect-
ed in accordance with the German regulations for the securing of work
sites at roads (RSA).

Attention!

If the boom and/or the working cage is lowered under

4,5 m above ground within the traffic area of road vehi-

cles - with working cage rotated to the side -also the

area underneath the working cage must be secured.

Summary of Contents for 27409






































































































































































































































































Search results

Summary of Contents for 27409

Reviews:

Related manuals for 27409

Brands by name

Popular brands

RUTHMANN 27409, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for 27409

Reviews:

Related manuals for 27409

Brands by name

Popular brands