RUTHMANN 27409, Operating And Maintenance Instructions Manual

Page: 17 / 261

Index
BA.GB.12-27409-05-07-FTA-jr
RUTHMANN-Steiger
®
TB270
V
6.6.6.2.2 Alteration of Password ........................................................... 6-42
6.6.6.3
Setting of clock ...................................................................... 6-43
6.6.7 Switching-over of the boom movements which should be
carried out simultaneously...................................................... 6-45
6.6.8
Changing of the jacking variant with „Minimum jacking“ ......... 6-45
6.6.9 Deactivation or activation of the possibility of sensitive
control .................................................................................... 6-46
6.7 Sensitive control 6-47
7 Emergency control system (Emergency
Lowering)
7-1
7.1 Failure of main drive power 7-3
7.2 Failure of operating staff 7-4
7.3 Failure of electrical system / electronic system
(extreme case)
7-5
7.4 Emergency lowering after an interruption of the Steiger
move
ments through a „conditional emergency cut-off“
7-8
7.5 Manual adjustment of cage inclination 7-10
8 Rectification of malfunctions 8-1
8.1 Handling problems on the control during Steiger-
operation
8-1
8.2 Effect of a malfunction on Steiger-operation 8-5
8.2.1 Restricted Steiger-operation .................................................... 8-5
8.2.2 Conditional Emergency Cut-off ................................................ 8-5
8.2.3 Emergency Cut-off ................................................................... 8-6
8.3 Reading of fault memory 8-7
8.3.1 Meaning of the fault messages and information about
remedy ..................................................................................... 8-8
9 Maintenance 9-1
9.1 Lubrication 9-4
9.1.1 Lubricants ................................................................................ 9-4
9.1.2 Lubricating point list ................................................................. 9-5
9.1.3 Lubricating point plan ............................................................... 9-7
9.2 Tightening Moments 9-8
9.2.1 Screw connections ................................................................... 9-8