KP-3016/KP-3016A Series
KP-3016/3016A Menu System 95
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
To
configure mixing
, do the following:
1.
Starting at the Audio Options|Advanced menu, select
Mixing
.
2.
Press the
SEL button
.
Headset, OMNEO 1, OMNEO 2, Speaker, and To Matrix appear in the panel display
.
NOTE:
OMNEO 1 is only available in AIO mode. OMNEO 1 and 2 are not available on the KP-3016A.
3.
Using the AUX/MENU shaft encoder, select a the
destination
to mix to (or the destination to which the sources are
mixed).
NOTE:
If Headset is chosen, an additional step of choosing Both, Left Chan, or Right Chan is required.
4.
Press the
SEL button
.
A list of available inputs appear in the panel display.
5.
Using the AUX/MENU shaft encoder, select the
input
to mix to the selected output.
6.
Press the
SEL button
.
An arrow appears next to the selection.
NOTE:
Repeat steps 5 and 6 to select additional inputs to mix to the selected output.
Mix Mode
The
Mix Mode
menu is used to control whether mixes made to the speakers and headsets are muted when they are not active.
Available options for this menu are:
Mixes to Spkr/Hdst Switched (d)
Aux inputs mixed to speakers or headsets are only heard when the panel is in the
appropriate headset or speaker mode.
Mixes always active
Aux inputs mixed to speakers or headset are always heard, regardless of whether the
panel is in headset or speaker mode.
To
configure Mix Mode,
do the following:
1.
Starting at the Audio Options|Advanced menu, select
Mix Mode
.
2.
Press the
SEL button
.
Mixes to Spkr/Hdst Switched and Mixes Always Active appear in the panel display
.
3.
Using the AUX/MENU shaft encoder, select the
mix mode
you desire.
4.
Press the
SEL button
.
An arrow appears next to the selection.
Noise Gate
The
Noise Gate
menu is used to enable or disable the audio level (-72dBu) at which the mic turns on. When noise gate is
enabled, microphone noise gate is set to -72dBu; when the noise gate is disabled, the microphone is always on.
To
enable/disable noise gate
, do the following:
1.
Stating at the Audio Options|Advanced menu, select
Noise Gate
.
2.
Press the
SEL button
.
Hdst Mic and Panel Mic appear in the panel display.
3.
Using the AUX/MENU encoder knob, select the
Hdst Mic
or
Panel Mic
.
4.
Press the
SEL button
.
Disable and Enable appear in the panel display
.
5.
Using the AUX/MENU encoder knob, select
Disable
or
Enable
.