KP-3016/KP-3016A Series
KP-3016/3016A Menu System 129
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
5.
Verify
DHCP is disabled
.
NOTE:
When making changes to the OKP IP parameters, DHCP must be disable before changing the Domain name
or IP Address. If DHCP is enabled, you can still view the IP Parameters, but you cannot make changes to
them.
6.
Press
CLR
.
7.
Using the AUX/MENU shaft encoder,
select
IP Parameters
.
NOTE:
•
Pressing the SEL key or a single-tap to the AUX/MENU shaft encoder moves the focus to the next
octet, unless already on the last octet, in which case it saves the current IP Address.
•
Pressing the CLR key, double-tapping the AUX/MENU shaft encoder, or single-tapping the MAIN
shaft encoder moves the focus to the previous octet, unless already on the first octet, in which case it
cancels editing of the IP Address.
8.
Press the
SEL button
.
IP Address, Gateway, Netmask, Domain, and DNS Server appear in the panel display.
9.
Press the
SEL button
.
The IP Address appears with the first octet blinking in the panel display.
10.
Using the AUX/MENU shaft encoder, enter the
first octet number
in the IP Address.
11.
Press the
SEL button
.
The focus shifts to the second octet
.
12.
Using the AUX/MENU shaft encoder, enter the
second octet number
in the IP Address.
13.
Press the
SEL button
.
The focus shifts to the third octet
.
14.
Using the AUX/MENU shaft encoder, enter the
third octet number
in the IP Address.
15.
Press the
SEL button
.
The focus shifts to the last octet
.
16.
Using the AUX/MENU shaft encoder, enter the
last octet number
in the IP Address.
17.
Press the
SEL button
.
The OMNEO Setup menu options appear in the panel display
.
To
configure the Gateway Address
, do the following:
1.
Using the AUX/MENU shaft encoder, select
Gateway
.
2.
Press the
SEL button
.
The Gateway Address appears with the first octet blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, enter the
first octet number
in the Gateway Address.
4.
Press the
SEL button
.
The focus shifts to the second octet
.
5.
Using the AUX/MENU shaft encoder, enter the
second octet number
in the Gateway Address.
6.
Press the
SEL button
.
The focus shifts to the third octet
.
7.
Using the AUX/MENU shaft encoder, enter the
third octet number
in the Gateway Address.
8.
Press the
SEL button
.
The focus shifts to the last octet
.
9.
Using the AUX/MENU shaft encoder, enter the
last octet number
in the Gateway Address.
10.
Press the
SEL button
.
The OKP Setup menu options appear in the panel display
.
To
configure the Netmask Address
, do the following: