130 KP-3016/3016A Menu System
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
1.
Using the AUX/MENU shaft encoder, select
Netmask
.
2.
Press the
SEL button
.
The Netmask Address appears with the first octet blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, enter the
first octet number
in the Netmask Address.
4.
Press the
SEL button
.
The focus shifts to the second octet
.
5.
Using the AUX/MENU shaft encoder, enter the
second octet number
in the Netmask Address.
6.
Press the
SEL button
.
The focus shifts to the third octet
.
7.
Using the AUX/MENU shaft encoder, enter the
third octet number
in the Netmask Address.
8.
Press the
SEL button
.
The focus shifts to the last octet
.
9.
Using the AUX/MENU shaft encoder, enter the
last octet number
in the Netmask Address.
10.
Press the
SEL button
.
The RVON Setup menu options appear in the panel display
.
11.
Press
CLR
to exit menu mode.
To
configure the Domain name
, do the following:
1.
Using the AUX/MENU shaft encoder, select
Domain
.
2.
Press the
SEL button
.
The domain name appears with the first character blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, select a
new character at the current position
.
4.
Press the
SEL button
.
5.
Using the AUX/MENU shaft encoder, move to the
next or previous character position
.
6.
Press
SHIFT
to insert a character at the current position.
7.
Press the
SEL button
OR
Press the
AUX
shaft encoder to move to the next character.
NOTE:
Press the MAIN shaft encoder to cancel editing. A confirmation is required.
8.
Repeat
steps 3
to
6
until the domain is named.
9.
Once finished, press the
SEL
button
.
Save Name? appears in the panel display.
10.
Press the
SEL button
.
To
configure DNS Server,
do the following:
1.
Using the AUX/MENU shaft encoder, select
DNS Server
.
2.
Press the
SEL button
.
The DNS Server Address appears with the first octet blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, enter the
first octet number
in the DNS Address.
4.
Press the
SEL button
.
The focus shifts to the second octet
.
5.
Using the AUX/MENU shaft encoder, enter the
second octet number
in the DNS Address.
6.
Press the
SEL button
.
The focus shifts to the third octet
.
7.
Using the AUX/MENU shaft encoder, enter the
third octet number
in the DNS Address.
8.
Press the
SEL button
.
The focus shifts to the last octet
.