120 KP-3016/3016A Menu System
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Menu System, OMNEO Offers (Only available for KP-3016)
The
OMNEO Offers
menu item is used to configure the keypanel to communicate with the matrix via an OMNEO or AIO
connection. From this menu, you can also configure the OMNEO channels to be used for AUX Inputs.
OMNEO Matrix Connection Configuration
To
configure an available OMNEO device connection port
, do the following:
1.
Starting at the OMNEO Offers|Keypanel menu, select
OKP
.
2.
Press the
SEL button
.
A list of available OMNEO devices appears
.
3.
Using the AUX/MENU shaft encoder,
select the
OMNEO device
you want to use.
An arrow appears next to the device
.
4.
Press
CLR
to exit menu mode.
OMNEO Aux Port Configuration
To
configure the OMNEO channels as Aux Inputs
, do the following:
1.
Starting at the OMNEO Offers|Keypanel menu, select
Aux Input
.
2.
Press the
SEL button
.
OMNEO 1 and OMNEO 2 appears in the panel display
.
3.
Using the AUX/MENU shaft encoder, select
OMNEO 1
or
OMNEO 2
.
4.
Press the
SEL button
.
A list of available OMNEO offers appears in the panel display
.
5.
Using the AUX/MENU shaft encoder,
select the
OMNEO offer
you want to configure as an Aux Input.
6.
Press the
SEL button
.
The OMNEO Aux Input is configured
.
Menu System, RVON Offers (Only available when an RVON-IO is detected)
The
RVON Offers
menu item is used to configure the matrix connection when an RVON-I/O is attached to the AIO port on
the back of the keypanel.
RVON-IO Matrix Connection
RVON-I/O
RVON-16, RVON-8, RVON-C, and RVON-I/O (in local mode). Use the Frame connection on
the back panel of the keypanel.
NOTE:
For more information about RVON-I/O configuration, see the RVON-I/O user manual (F.01U.193.280).
To
configure the Matrix connection port
, do the following:
1.
Starting at the RVON Offers|Keypanel menu, select the
Matrix connection type
you want to use.
NOTE:
If an RVON-I/O is connected to the keypanel, RVON-I/O replaces the AIO menu option.
2.
Using the AUX/MENU shaft encoder,
select the
port
you want to use.
An arrow appears next to the port
.