26 Installation
KP-3016/3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Changing the Headset Connector
The headset connector can be switched between a 4-pin XLR and 5-pin XLR (also compatible with 6-pin) connector.
To
replace the front panel headset connector
, do the following:
1.
Using a flat-blade screwdriver with 2.4 mm wide (3/32 in.) tip, turn the
set screw counterclockwise
to loosen the
connector from the unit.
2.
Once the connector is loose, tip the
unit
and gently shake the
connector loose
.
3.
Carefully pull the
headset cables
free from the chassis.
NOTE:
If the cable assembly becomes caught, shift the cable up and down to clear the cable
from the unit.