KP-3016/3016A Series
163
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Mounting the Power Supply to the EKP-3016
To
mount the power supply mounting bracket to an EKP-3016
, do the following:
1.
Align the
power supply mounting bracket screw holes with the appropriate mounting holes on the rear panel
of
the EKP-3016 unit.
2.
Using a screwdriver, attach the
power supply mounting bracket
with the two (2) supplied screws.
3.
Attach the
power supply cable tie clip
to the predefined clip mounting hole on the rear of the keypanel unit.
4.
From the left-hand side of the mounting bracket, carefully slide the
power supply
into the bracket.
NOTE:
The Frame and EXP OUT connections cannot be populated until the power supply mounting bracket is fully
installed.
5.
Attach the
DC power connector
to the unit.