KP-3016/KP-3016A Series
KP-3016/3016A Menu System 131
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
9.
Using the AUX/MENU shaft encoder, enter the
last octet number
in the DNS Address.
10.
Press the
SEL button
.
The OMNEO Setup menu options appear in the panel display
.
11.
Press
CLR
to exit menu mode.
Service Menu, Page Change
Page Change
is used to select whether you are allowed to change setup pages while talk keys are active. By default, in
Standard Intercom Mode, page changes are allowed when talk keys are active. However, the default in Alternate Intercom
Mode does not allow page changes to occur when talk keys are active.
Available options:
Auto
The default is followed depending on the Intercom Mode: Standard or Alternate.
Always Allow
Page changes are allowed while Talk Keys are active.
No Talk Keys
Page changes are not allowed while Talk Keys are active. A red bar appears above/below the
keys signifying page changes are not allowed. If the talk key is turned off, the red bar turns
blue and page changes can be done.
To
configure page change operation
, do the following:
1.
Starting at the Service|Page Change menu, select
Page Change
.
2.
Press the
SEL button
.
Auto, Always Allow, and No Talk Keys appear
.
3.
Using the AUX/MENU shaft encoder, select the
page change option
you desire.
4.
Press the
SEL button
.
An arrow appears next to the selected option.
Service Menu, Reset Cfg
Reset Cfg
restores almost all custom settings to the defaults and erases all stored autodial numbers. Reset Cfg does not change
the selected alpha size, intercom mode, poll ID, or headset transfer state.
To
reset the keypanel configuration
, do the following:
1.
Starting at the Service|Reset Cfg menu, select
Do Reset
.
2.
Press the
SEL button
.
Configuration Reset appears in the panel display
.