90 KP-3016/3016A Menu System
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
4.
Using the AUX/MENU shaft encoder, select the
output
you desire to modify.
If Headset is chosen:
a.
Press the
SEL button
.
Both, Left Chan, and Right Chan appear in the panel display
.
b.
Using the AUX/MENU shaft encoder, select either
Both
,
Left Chan
, or
Right Chan
.
5.
Press the
SEL button
.
Frequencies and Mode appear in the panel display.
6.
Using the AUX/MENU shaft encoder, select
Mode
.
Disabled and Enabled appear in the panel display
.
7.
Using the AUX/MENU shaft encoder, select
Enabled
.
8.
Press the
SEL button
.
An arrow appears next to the selected option
.
9.
Press the
CLR
button
.
Frequencies and Mode appear in the panel display
.
10.
Using the AUX/MENU shaft encoder, select
Frequencies
.
11.
Press the
SEL button
.
The Low Freq scroll box and the High Freq scroll box appear in the panel display.
12.
Using the AUX/MENU encoder knob, select the
low frequency
you desire.
13.
Using the AUX/MENU shaft encoder, select the
high frequency scroll box
.
14.
Using the AUX/MENU encoder knob, select the
high frequency
you desire.
Equalization
Equalization
allows the user to select predefined settings that modify the frequency envelope of an audio channel. This is
a 5-band equalizer. Each preset provides a different EQ to be applied to the audio.
Available selections for this menu are:
Default
0 dB (15Hz–20kHz)
Hiss Reduction
0 dB (15Hz–2kHz)
-6dB (2kHz–12.6kHz)
Rumble Reduction.
0 dB (50Hz–20kHz)
To
configure a preset frequency response for an input
, do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select
Equalization
.
Inputs and Outputs appears in the panel display.
2.
Using the AUX/MENU shaft encoder, select either
Input
.
3.
Press the
SEL button
.
Hdst Mic, Matrix In, and Panel Mic appear in the panel display.
4.
Using the AUX/MENU shaft encoder, select either
Hdst Mic
,
Matrix In
, or
Panel Mic
.
5.
Press the
SEL button
.
Mode and Presets appear in the panel display.
6.
Using the AUX/MENU shaft encoder, select
Mode
.
Disabled and Enabled appear in the panel display
.
7.
Using the AUX/MENU shaft encoder, select
Enabled
.
8.
Press the
SEL button
.
An arrow appears next to the selected option
.
9.
Press the
CLR
button.
Mode and Presets appear in the panel display
.