124 KP-3016/3016A Menu System
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Service Menu, Key View
The
Key View
menu is used to configure the keypanel keys to show key crosspoint gains, show listen assignments, or show
the matrix for each key assignment.
NOTE:
Show Lstn and Show Mtx are mutually exclusive options. Only one (1) of these options may be enabled at a
time.
Available options for this menu are:
Show Gain
The crosspoint gain bar graph for each key is shown below the talk assignment.
Show Lstn
The listen assignment for each key is shown above the talk assignment.
Show Mtx
The matrix name for each key assignment is shown above the talk assignment.
IMPORTANT:
When the keypanel is configured for 8 Char or 8 Char (Unicode), none of these options are available.
To
configure the Key View
, do the following:
1.
Starting at the Service menu, select
Key View
.
2.
Press the
SEL button
.
Show Gain, Show Lstn, and Show Mtx appear in the panel display.
3.
Using the AUX/MENU shaft encoder, select
Show Gain
to show gain on the key display.
OR
Using the AUX/MENU shaft encoder, select
Show Lstn
to show listen assignments on the key display.
OR
Using the AUX/MENU shaft encoder, select
Show Mtx
to show the matrix assignments on the key display.
4.
Press the
SEL button
.
Disabled and Enabled appear in the panel display
.
5.
Using the AUX/MENU shaft encoder,
select
Enabled
or
Disabled
.
6.
Press the
SEL button
.
An arrow appears next the selected option.