
30 Basic Operation
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Display Icons
Display Icons
are used to indicate the accessories and features enabled, disabled, active, and inactive. Use Table 3 for a
complete description of each icon seen on the KP-3016/3016A.
TABLE 3.
Display Icon Descriptions
Icon
Icon Name
Description
Matrix Connected
The keypanel is connected to the Matrix. This icon briefly displays at connection.
Disconnected From
Matrix
There is no connection between the Matrix and the keypanel. This icon is displayed as long as
there is no Matrix data connection.
NOTE:
When the keypanel is disconnected, it displays its Device Name (for OMNEO) or IP
Address (for RVON) device connections.
Firmware
Download
Firmware is being downloaded to the keypanel. A progress bar at the bottom displays:
chunk progress
overall progress
chunk/overall progress
NOTE:
For more information, see “Download Firmware to the KP-3016/3016A From
AZedit” on page 67.
Headphones
The headphones are enabled. This indicates the headset microphone is not enabled.
Headset
The headset is enabled.
To enable the headset, see “Audio Options Menu, Headset Speaker” on page 98.
Headset Mute
The headphone is muted.
If the headset mic is muted, MIC MUTE is shown instead of HDST MUTE
Microphone
The microphone is enabled.
Microphone Mute
The microphone is muted.
To mute the microphone, see “Audio Options Menu, Mic Mute” on page 102.
To mute the headset mic, see “Audio Options Menu, Headset Mic” on page 97
Speaker
The speaker is enabled.
To enable the speaker, see “Audio Options Menu, Speaker” on page 104.
Speaker Mute
The speaker is muted.
Snoop Tally Active Snoop Tally is Active on the keypanel.
You must have the Hot Mic enabled to use snoop tallies.
To enable snoop tallies, see “Service Menu, Snoop Tally” on page 134.
Hot Mic
The hot mic is active.
To activate Hot Mic, see “Audio Options Menu, Matrix Out” on page 101.
Tone 1kHz Enabled Tone 1kHz is enabled on the keypanel.
To enable tone 1kHz, see “Audio Options Menu, Tone Gen” on page 104.