110 KP-3016/3016A Menu System
KP-3016/KP-3016A Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.315.927
Rev. 02
Key Assign Menu, Pt-to-Pt
Pt-to-Pt
assigns a key that talks or listens to another intercom port.
NOTE:
Some Pt-to-Pt destinations may be non-keypanel devices that cannot activate talk and listen paths. Therefore, if
you want full communication, you may need to assign both talk and listen on the key. For more information, see
“Key Assign Menu, Auto Func” on page 113.
To
assign Pt-to-Pt to the keypanel key
, do the following:
1.
Starting at the Key Assign|Pt-to-Pt menu,
select the
port
you want to assign to the keypanel key.
2.
Press the
SEL button
.
A list of auto-functions appear
.
3.
Using the AUX/MENU shaft encoder,
select the
auto-function
you want to assign to the Pt-to-Pt assignment, if
applicable.
4.
Press the
SEL button
.
Tap Key appears in the panel display.
5.
Press down on the
keypanel key position
where you want the Pt-to-Pt assignment to appear.
The key color changes and the alpha appears on the key
.
Key Assign Menu, Party Line
Party Line
assigns a key that talks and/or listens to a party line. Party Lines are defined in AZedit.
NOTE:
Party Line members are usually non-keypanel devices that cannot activate talk and listen paths. Therefore, if you
want full communication, you need to assign both talk and listen on the key. If all communications are normally
2-way, you may wish to assign the key as Talk+Auto Listen.
To
assign a Party Line to the keypanel key
, do the following:
1.
Starting at the KeyAssign|Party Line menu, select the
party line
you want to assign to the keypanel key.
2.
Press the
SEL button
.
A list of auto-functions appear
.
3.
Using the AUX/MENU shaft encoder,
select the
auto-function
you want to assign to the Party Line assignment, if
applicable.
4.
Press the
SEL button
.
Tap Key appears in the panel display.
5.
Press down on the
keypanel key position
where you want the Party Line assignment to appear.
The key color changes and the alpha appears on the key
.
Key Assign Menu, IFB
IFB
assigns the IFB assignment type to a key. By default, all IFBs are restricted. You must select the appropriate scroll enable
check box in AZedit, to see IFBs.
To
assign an IFB to the keypanel key
, do the following:
1.
Starting at the KeyAssign|IFB menu, select the
IFB
assignment
you want to assign to the keypanel key.
2.
Press the
SEL button
.
A list of auto-functions appear
.
3.
Using the AUX/MENU shaft encoder,
select the
auto-function
you want to assign to the IFB assignment, if
applicable.
4.
Press the
SEL button
.
Tap Key appears in the panel display.
5.
Press down on the
keypanel key position
where you want the IFB assignment to appear.
The key color changes and the alpha appears on the key
.