Roth BW/H Komfort, Installation Manual

Page: 49 / 172

BW/H Komfort
48000120_r
oth_bwh_k
omf
or
t.mon06304.ind
d
49 |
B
1
3
2
Main Menu
Measured Values
Messages
Solar
The outdoor temperature sensor FAP12 is suitab-
le for mounting on even surfaces and it is needed for
BW/H Komfort weather controlled heating curcuit. The
sensor has a wether resistant housing.
3.5 Outdoor temperature sensor
4. Basics of operation
4.1 Operating devices and display
The controller is only operated by the 3 pushbuttons besi-
de the display. The forward-button (1) is used for scrolling
forward through the menu or to increase the adjustment
values. The backward-button (2) is accordingly used the
other way round. Button 3 is used for selection of the menu
lines and confirmation.
 Plese select your requested menu by the buttons 1 and
2.

Shortly press button 3, the selected submenu is now
shown on the display. By pressing the "back"-button, the
display returns to the former menu level.

Press buttons 1, 2 and 3 several times until the choosen
menu line is reached.

Shortly press button 3 in the relevant menu line for mo-
dification of adjustment values - "change value" appears
The controller is equipped with a red-/green control lamp.
The following control and system status are signalised:
• green flashing: automatic operation, no malfunction
• red flashing: malfunction of the system
4.2 Control lamp
Text display
control lamp
forward
Set
(selection / confirmation)
backward
Main Menu
Measured Values
Messages
Solar
on the display - adjust the requested value by pressing
the buttons 1 and 2 (for large intervals, please keep the
button pressed).
 Shortly press button 3 in order to confirm the adjust-
ment.
 Please reply to the following security request "Store?"
by choosing "yes" or "no" (buttons 1 and 2) and confirm
with button 3.
 Note:
If no input is made within 7 seconds in the modification
mode, the controller automatically changes into the
read-out mode. If no button is pressed for 4 minutes in
the read-out menu, the display returns to the measured-
values menu (in case of an existing message,the display
changes into the message menu). If button 3 is pressed
for 2 seconds, the display goes back to the main menu.