Ross Abekas Mira Manual Download Page 7

Page: 7 / 73

Exporting Clips.................................................44

Supported Media Files for Export..........................................44

To Select an Export Destination............................................44

To Export a Clip.....................................................................45

Server Configuration........................................46

To Assign Channel Transports to Physical

Channels........................................................................46

Channel Setup.......................................................................46

To Configure the Hardware Channels....................47

Video Formats.......................................................................48

UHDTV1 Support...................................................48

To Configure the Video Format..............................48

Video Router Setup...............................................................49

To Connect to a Video Router................................49

Audio Setup...........................................................................49

To Configure the Audio Setup................................49

Audio Router Setup...............................................................50

To Configure the Audio Router...............................50

Timecode Setup....................................................................51

To Configure the Timecode....................................51

Compression Setup...............................................................52

To Configure Video Compression..........................52

Channel Label Setup.............................................................52

To Assign Labels to Channel Transports...............52

Quad Viewer Setup...............................................................52

Quad Viewer Display.............................................52

Count Down Display..............................................53

To Configure the Quad Viewer...............................53

TSL Tally Setup.....................................................................53

To Configure the TSL Tally Input............................53

Replay Setup.....................................................55

Control Surface Connection..................................................55

Server Setup for Replay........................................................55

To Configure the Server for Replay.......................55

User Setup............................................................................56

To Set the Audio Tracks for the

Headphones...................................................56

To Set the Play List Auto-fill...................................56

To Set the Pre-roll Time.........................................56

To Set the Auto Jog Feature..................................57

To Set the Default Fast Forward and Rewind

Speeds............................................................57

To Set the Max Jog Speed.....................................57

To Set the Max Fast Jog Speed.............................57

To Set the Max Cruise Speed................................57

To Set the Max Fast Cruise Speed........................57

To Set the Max T-Bar Speed (VAR 2)....................58

To Set the Min T-Bar Speed (VAR 2).....................58

To Set the Max T-Bar Speed (VAR 3)....................58

To Set the Min T-Bar Speed (VAR 3).....................58

To Set the Auto-mark In-point Offset......................58

To Set the Auto-mark Out-point Offset...................59

To Set the Action of Camera Softkeys in CP

Mode...............................................................59

To Set the Transition Type for Two Replay

Channels.........................................................59

To Set the Duration of a Mix Transition..................59

To Set Whether Gang Mode is Selected for

Live EE Record...............................................59

To Set Whether Gang Mode is Deselected if

a Playout Channel is Selected........................60

To Set Whether Preferred Camera Angles are

Used for Live EE Record................................60

To Set the Preferred Camera Angles.....................60

To Set the Preferred Play List................................60

To Set Whether a Clip is Automatically Loaded

in CP Mode.....................................................60

To Set Whether the Out-point of a Clip is Used

in CP Mode.....................................................60

To Set Whether Play List uses

PGM/PVW......................................................61

To Set Whether a Mark Point is Saved to the

Clip Register...................................................61

To Set the Amount Inactive Lists are Dimmed

........................................................................61

To Set Control Surface Brightness.........................61

To Set Control Surface Contrast............................61

To Set Playout Channel Color................................62

To Set the Saturation of the Playout Channel

Borders...........................................................62

To Set the Source of the Name that is Applied

to New Clips....................................................62

To Set the Initial Clip Name Options......................62

To Set the Clip Name Options................................63

User Setup Files....................................................................63

To Save a User Setup File.....................................63

To Load a User Setup File.....................................63

To Name a Camera Input......................................................63

Remote Control Support..................................64

Remote Communications (RS-422)......................................64

To Configure Remote Communications.................64

DashBoard............................................................................65

Clip ID Support......................................................................65

Sony

MVS Series Switcher..................................................65

Maintenance......................................................66

Media Drive...........................................................................66

Disk Space.............................................................66

Troubleshooting...............................................67

Specifications...................................................69

Resources.............................................................................69

Operating Temperature.........................................................69

Ports..................................................................70

Serial (RS422) Port...............................................................70

LTC Port................................................................................70

AES Audio Port.....................................................................70

Mira Manual (v6.1) — Contents •

Summary of Contents for Abekas Mira










































































Search results

Summary of Contents for Abekas Mira

Reviews:

Brands by name

Popular brands

Ross Abekas Mira, Manual

Search results

Summary of Contents for Abekas Mira

Reviews:

Brands by name

Popular brands