interference, in which case the user may have to take
adequate measures.
Safety and First Aid
Ross
®
Abekas
®
equipment is designed to the highest
standards of quality and reliability. However, no matter
how these systems are designed, operators and
maintenance personnel can be exposed to electrical shock
hazard when protective covers are removed for
maintenance or the installation of options. With this
caution in mind, each operator and engineer must observe
all safety regulations, and have a clear understanding of
first aid procedures related to electrical hazards.
Safety and Compliance Certifications
•
Certified to IEC/EN-60950, EN-55032, and
EN-55024
Power Information
To ensure safe operation and to guard against potential
shock or risk of fire, ensure your AC power source for
the system is within the required voltage range and
frequency.
•
AC Voltage Input (Auto-Ranging): 100VAC through
240VAC
•
Input AC Frequency Range (nominal) 47Hz — 63Hz
•
Input AC Power Requirement at 110VAC: ~12A
Maximum
•
Input AC Power Requirement at 240VAC: ~6A
Maximum
Operating Environment
The optimum operating environment is within the
following ranges:
•
Recommended Operating Temperature: 13°C to 35°C
(55°F to 95°F)
•
Recommended Operating Humidity: 20% to 80%
non-condensing
Note:
High temperature/humidity should be avoided at all times.
Safety Information
Important Safety Notices
This system complies with safety standard
IEC/EN60950-1. To ensure safe option and to guard
against potential shock hazard or risk of fire, the
following must be fulfilled:
•
This system features auto-ranging power supplies.
Ensure that your power source is within the correct
range of voltage and frequency, as required by the
system.
•
Each chassis in this system must be electrically
grounded by connecting the input power cord(s) to a
correctly wired and grounded power outlet.
Warning:
Completely disconnect all input AC power
cords from the chassis before removing the top cover
from the chassis. Failure to do so will expose
dangerous electric currents and voltages. Physical
contact with these electric currents and voltages is
extremely dangerous and may result in severe
physical injury or death! Only qualified service
personnel should remove the top cover from the
chassis.
Warning Hazardous Voltages:
Modules marked
with this symbol may be removed while the system
is operating (powered). After removing a module,
beware of dangerous electric currents and voltages
that are exposed on the module receptacle connector
inside the chassis. Please keep fingers, tools, and
foreign metal objects away from the exposed
receptacle connector while the chassis has input AC
power applied. Physical contact with these electric
currents and voltages is extremely dangerous and
may result in severe physical injury or death! Only
qualified service personnel should remove these
modules.
Environmental Information
The equipment that you purchased required the
extraction and use of natural resources for its
production. It may contain hazardous substances that
could impact health and the environment.
To avoid the potential release of those substances into
the environment and to diminish the need for the
extraction of natural resources, Ross Video encourages
you to use the appropriate take-back systems. These
systems will reuse or recycle most of the materials from
your end-of-life equipment in an environmentally friendly
and health conscious manner.
The crossed-out wheeled bin symbol invites you to use
these systems.
4
• Document Information — Mira Manual (v6.1)
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
