Replay
The replay operation uses a replay event that is opened
on a Control Surface. The replay event requires channels
on the server to be set to replay (ISO), and the Control
Surface to be assigned to playout channels.
Replay Events
A replay event puts the server into replay operation. The
incoming video signals from the cameras are
continuously being recorded for use in a replay. When
an event you want to replay occurs, you can seek to the
start of the action that you want to replay and play it out
of one of the playout channels.
To Create/Edit a Replay Event
A replay event puts the server into replay mode and
optimizes the interface for a replay
Note:
The server must be configured into the ISO mode you
want to use for your replay setup and any Control Surfaces must
be connected to the server and assigned to playout channels
before you can create a replay event.
Tip:
If you have already created a replay event, you can
right-click on the file in the Clip Library and click Modify Replay
Event.
1.
In Mira Explorer click
on the ISO record
channels to confirm the input video from the
cameras.
2.
Click
New
>
New Replay Event
.
3.
In the
Replay Event Name
field, enter a name for
the replay event.
4.
On the
Record Channel
list, select the channel
transport that you want to use for the multi-channel
ISO clip.
Note:
The ISO mode records multiple video streams into
a single clip and uses a single channel transport. In most
cases this will be channel A (ChA).
5.
Click
Next
.
6.
Do you have a User Setup file for your Control
Surface that you would like to use?
•
Yes
– click
Select Mira Control Surface
User Setup
, navigate to the file, and click
Open
.
•
No
– proceed to the next step
7.
Click
Next
8.
Do you have a Replay Event Template that you
would like to use?
•
Yes
– click
Select Replay Event Template
,
navigate to the file, and click
Open
.
•
No
– proceed to the next step.
Tip:
If any clips included in a playlist in the template have
been moved or deleted they will be listed as missing. Click
Select Path to Locate Missing Clips, navigate to the new
location for the clips and click Select Folder. If you want
to save this new location for the clips select Save New
Paths back to original Replay Event Template.
9.
Click
Next
10.
In the
Camera Name
field, enter a name for each
camera feed.
11.
On the
Camera Number
list, select the number
you want to assign to each camera feed.
12.
Click
Next
.
13.
You can apply preset names to replay clips from the
Control Surface using the sofkeys. Set the names
you would like to use as follows:
a)
In the
Initial Name
column, enter a prefix you
want be able to apply to a clip name using the
8,9, or 10 sofkeys on the Control Surface.
b)
In the
SK 1
through
SK 10
columns, enter a
shifted (
Shift
+
SK X
) and unshifted (
SK X
)
name.
The shifted and unshifted names allow you to
be able to apply two different names from the
same softkey.
16
• Replay — Mira Manual (v6.1)
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
