loaded into the VKA channel transport must have
an alpha track.
9.
In the
Protocol Configuration
area at the bottom
of the window, select specific configurations for the
protocol you are using.
•
BVW-75/Odetics
•
Select
Disable field timecode reporting
to force the server to report timecode only
once every video frame. If this option is not
selected, the server reports timecode every
field.
•
Select the
Protocol ID
that you want to use
(
Abekas 6000
,
Sony BVW-75
, or
Generic DDR
).
•
VDCP
•
Select
Louth Preview
to allow clips to be
pre-cued in the background for seamless
back-to-back transitions during playout.
•
In the
Maximum length of Clip Name
field, select the maximum length of a clip
name that is reported to the controlling
device.
10.
Click on the
Ch-X:
list and select the room that you
want to assign to the channel.
11.
Click
Restart Mira
. A confirmation dialog box is
displayed.
12.
Click
Restart Mira
to restart the server application
and services with the new setting.
13.
Click
OK
when the restart has completed to dismiss
the window.
DashBoard
The DashBoard control system allows remote access to
multiple pieces of Ross Video equipment, including
openGear
®
cards, Carbonite production switchers, Ross
video servers, and Ross cameras. Download and install
the latest version of DashBoard from
Review the documentation that comes with DashBoard
for information on installing and launching DashBoard.
To control Mira from DashBoard you must create a
custom panel in DashBoard using PanelBuilder to send
VDCP or Mira Ethernet API commands to the server.
Note:
DashBoard cannot display the video previews for any
channel transports from the server.
Clip ID Support
Devices using the VDCP or Odetics protocol can use the
8-character clip ID assigned to a clip. By default, the
server does not assign a clip ID to the clip when it is
recorded or imported. If there is no clip ID, the first 8
characters of the clip name are used instead.
Sony
®
MVS Series Switcher
Use the following information to set up your Sony
®
MVS
series switcher to control the server as either a
Recorder
or
Player
device.
Table 8: VDCP RS422 Protocol Constants
Setting
Item
No.
(1-N)*
Video Port
1
10
Maximum Open Delay
2
0
Maximum Cueup Delay
3
0
Play After Cueup Delay
4
2
Stop Delay
5
6
Still Delay
6
0
Continue Delay
7
2
Idle Delay
8
* Set this value to the MVS virtual RS422 Port # that is
connected to the server.
Mira Manual (v6.1) — Remote Control Support •
65
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
