4.
Press
MARK
+
SCROLL
again to close the menu.
To Set Playout Channel Color
Set the color that is applied to the border of each playout
channel and the corresponding
OUTPUT CONTROL
button on the Control Surface.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
Replay P1 Channel Color
.
3.
Select the color you want to assign to the border of
the playout channel.
4.
Repeat for each playout channel in your system.
5.
Press
MARK
+
SCROLL
again to close the menu.
To Set the Saturation of the Playout Channel
Borders
Set the amount of saturation applied to the borders of the
playout channels.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
Desaturate P1/P2/P3/P4 monitor border
.
3.
Use the keyboard to enter the amount of saturation
(0-100%) you want to apply to the borders of the
playout channels.
4.
Press
MARK
+
SCROLL
again to close the menu.
To Set the Source of the Name that is Applied
to New Clips
Set the source of the name that is applied to all camera
angles when
SAVE
is pressed.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
Title new clips
.
3.
Select the source of the title you want to apply to
the camera angles and clip name.
•
IN Timecode
— in-point timecode is used as
the name.
•
OUT Timecode
— out-point timecode is used
as the name.
•
none — no default name is applied.
4.
Press
MARK
+
SCROLL
again to close the menu.
To Set the Initial Clip Name Options
Set the name prefixes you would like to be able to assign
to new clips from the Control Surface. When you press
the corresponding softkey the name is applied to the clip.
An additional part to the name can be applied to the name
with the use of the remaining softkeys.
Tip:
You can also set the initial clip names from the Replay
Event Setup menu (Press MARK + SCROLL > Modify Labels
(7)).
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
Initial name 1
.
3.
Use the keyboard to enter the default name you
would like to assign to the
8
softkey (max 25
characters).
4.
Use the up and down arrows, or the rotary dial, to
select
Initial name 2
.
5.
Use the keyboard to enter the default name you
would like to assign to the
9
softkey (max 25
characters).
6.
Use the up and down arrows, or the rotary dial, to
select
Initial name 3
.
7.
Use the keyboard to enter the default name you
would like to assign to the
10
softkey (max 25
characters).
Note:
The 10 softkey does not have the option to add an
additional part to the name.
8.
Press
MARK
+
SCROLL
again to close the menu.
62
• Replay Setup — Mira Manual (v6.1)
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
