4.
Click on the tab for the channel transport that you
want to route audio tracks to.
5.
In the
ChX Recorder Track 1
row, select the
source channel input (
ChX Input
) and the audio
track (
Track #
) from the input that you want to
record on track 1 of the clip.
6.
Repeat this step for all of the remaining recorder
tracks.
Tip:
Click NORMANIZE ALL ChX Input Routes to reset
all the input audio tracks to their default recorder track
assignment.
7.
Click the
Audio Output Router
tab.
8.
Click on the tab for the channel output that you want
to route audio tracks to.
9.
In the
ChX Audio Output Track 1
row, select
the source channel player (
ChX Player
) and the
audio track (
Track #
) from the player that you want
to route to track 1 of the output video stream.
10.
Repeat this step for all of the remaining output tracks
and channel outputs.
Tip:
Click NORMANIZE ALL ChX Output Routes to reset
all the player audio track to their default output track
assignment.
11.
Click
Apply
.
Timecode Setup
The timecode information can be overlayed on the output
video stream of the server. This can be time of day LTC
coming into the server, or the embedded timecode in the
video signal being recorded.
Important:
When you turn the timecode overlay on,
it is shown over the image on the video output.
To Configure the Timecode
The timecode information can be overlayed on the output
video stream of the server.
Note:
The timecode overlay is only on the video output and will
not appear in the recorded video.
1.
Launch the Mira Config application.
You may be prompted to allow the program to make
changes on the computer, click
Yes
.
2.
Click the
Timecode
tab.
3.
In the
Timecode Input Source
area, select the
timecode source for all record channels.
•
Time of Day LTC In
— the LTC signal coming
into the server.
•
REC-1 ATC In
— the embedded digital
timecode in the video source.
4.
In the
Timecode Overlay on Video Output
area, select whether the timecode is displayed on the
video output for each channel.
•
Off
— the timecode is not shown on the video
output stream.
•
On in EE and Record
— the timecode is only
shown when in EE mode or when the channel is
recording.
•
Always On
— the timecode is always shown
on the video output stream.
5.
In the
Timecode Overlay Position And Size
area, use the
Left/Right
and
Top/Bottom
sliders
to position the timecode overlay on the background
video source, and use the
H Small/H Large
and
V
Small/ V Large
sliders to adjust the size of the
timecode text.
6.
Click
Apply
.
Mira Manual (v6.1) — Server Configuration •
51
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
