To Set Whether Gang Mode is Deselected if a
Playout Channel is Selected
Set whether
GANG
is automatically deselected for
Output Control
when any of the playout channels
(
P1
,
P2
,
P3
,
P4
) are selected.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
GANG Disable when P1/P2/P3/P4 is
pressed
.
3.
Press
TOGGLE
(
4
) to toggle this feature on or off.
4.
Press
MARK
+
SCROLL
again to close the menu.
To Set Whether Preferred Camera Angles are
Used for Live EE Record
Set whether the preferred camera angle for each playout
channel is selected when
is pressed.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
LIVE-EE Auto-Select Preferred CAMs
.
3.
Press
TOGGLE
(
4
) to toggle this feature on or off.
4.
Press
MARK
+
SCROLL
again to close the menu.
To Set the Preferred Camera Angles
Set the preferred camera angle for each playout channel.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
P1 Preferred CAM
.
3.
Select the camera you want to assign to the playout
channel.
4.
Repeat these steps for the remaining playout
channels.
5.
Press
MARK
+
SCROLL
again to close the menu.
To Set the Preferred Play List
Set the preferred Play List for each playout channel when
a Replay Event is launched.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
P1 Preferred Playlist
.
3.
Use the keyboard to enter the Play List number
(
1
-
99
) you want to assign to the playout channel.
4.
Repeat these steps for the remaining playout
channels.
5.
Press
MARK
+
SCROLL
again to close the menu.
To Set Whether a Clip is Automatically Loaded
in CP Mode
Set whether a new clip is automatically loaded when the
selection highlight is moved to the next clip when
CLIP
PLAY
mode is active. When this setting is
OFF
you
must select the clip and press
LOAD
to manually load
the clip.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
2.
Use the up and down arrows, or the rotary dial, to
select
AUTO LOAD clip upon cursor move in
CLIP PLAY mode
.
3.
Press
TOGGLE
(
4
) to toggle this feature on or off.
4.
Press
MARK
+
SCROLL
again to close the menu.
To Set Whether the Out-point of a Clip is Used
in CP Mode
Set whether a clip stops playing when it reaches the
out-point in
CLIP PLAY
mode. When this setting is
OFF
the clip will continue to play through the out-point.
1.
Press
MARK
+
SCROLL
.
The
User Setup
menu opens.
60
• Replay Setup — Mira Manual (v6.1)
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
