Reference Manual
00809-0100-4024, Rev BA
September 2005
8-3
Rosemount 5600 Series
Figure 8-1. Example of the
Rosemount 5600 transmitter
head label and antenna label
Connection via Sensor
Bus Port
In addition to the standard communication ports, where HART or F
OUNDATION
fieldbus are the main protocols used, there is an additional Port available
(Sensor Bus Port).
This port is mainly used for upgrading Firmware, or for the use of the Radar
Master software in combination with a transmitter equipped with a
F
OUNDATION
fieldbus output. To utilize this port you need a RS485 modem
hooked up on terminals 6 and 7 on the Intrinsically Safe side of the
transmitter. The software used is the standard Rosemount Radar Master.
since terminals 6 and 7 are used by the Rosemount 2210 Display Unit you
have to disconnect it first. For more information about this Sensor Bus port,
please see the on-line help in the Radar Master software or contact your local
Rosemount representative.
NOTE
For Windows 2000 and Windows XP you need to set the Serial Port buffer as
instructed below:
1. Right click on My Computer and choose Properties
2. Choose the tab Hardware
3. Click on the button Device Manager
4. Navigate to Ports in the list of hardware
5. Right click on Serial Port COM 1 and choose Properties
6. Choose the tab Port Settings
7. Click Advanced
8. Drag the slider for Receive Buffer and Transmit Buffer to 1
9. Click OK
10. Reboot the Computer
11. Repeat for COM 2 or other communication port if available.
5600/LABEL.TIF
Antenna Label
HART
Summary of Contents for 5600 Series
