G A L A X Y ® A U R O U R A L S C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
65
Section 3 Management
3.1.10
DATARATE Details
For ease of discussion DATARATE details functions and options will be discussed by section.
At the top of this screen is a series of options for controlling what charts you see at the bottom.
You would select what you would like to view on the right, then click the corresponding Chart
button on the left to see the charts below for that selection. The options are as follows:
NumaRAID – Device:
This shows graphs pertaining to the entire Aurora RAID Array.
User:
Allows you to see graphs pertaining to I/O for a particular user.
RAID:
Allows you to see graphs pertaining to a particular RAID.
LUN:
Allows you to see graphs pertaining to a specific LUN.
Target:
Allows you to see graphs pertaining to a specific Fibre Channel Target/port.
For these examples, the default (NumaRAID – Device) is used.
