G A L A X Y ® A U R O U R A L S C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
68
Section 3 Management
The third set of graphs shows transfer sizes:
This set of charts is showing the number of commands, versus the transfer size at the bottom.
If you use only one application to access the array, what you would like to see here is a single
bar, as far to the right as possible. This indicates that the array did a lot of large transfers,
which were all equal in size. Going vertically is the number of commands/transfers, and
horizontally is the transfer size. In my example, there were about 96000 transfers performed,
each of which was 512 kilobytes in size.
If you would like to return to the NumaRAID Main GUI Screen, left-click on the Return to
NumaRAID GUI Main Page link at the bottom of the Data Rate Statistics Screen.
