G A L A X Y ® A U R O U R A L S C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
15
Section 1 Intro and Overview
A
B
C
K
L
M
N
P
Q R S T U V
O
D
F
E
G
I
H
A) Upper Power Supply Module
S) Network Port 1 Link LED
B) Power Supply Reset PB
T) Network Port 2 Activity LED
C) Power Supply Overtemp LED
U) Network Port 2
D) Fibre Channel HBA
V) Network Port 2 Link LED
E) Fibre Channel Port 1
F) 8Gb Fibre LED [both needed for 8Gb]
G) SAS RAID Controller
H) SAS Activity
I ) SAS Heartbeat
K) PS/2 Mouse Connector
L) PS/2 Keyboard Connector
M) USB Ports
N) Serial Port (Not used)
O) Exhaust Fan Area
P) VGA Connector
Q) Network Port 1 Activity LED
R) Network Port 1
Facing the rear, the power supply module is located on the left. To the right of each power
connector, is an over temp LED which is on if the power supply module is overheated because
a fan is not operating and receiving power. If this LED goes on, it could mean that the power
cable isn't operating properly, or there is a problem with the power supply, the module itself, or
Figure 1.3.1c
