Roline UD.6L0202D1275A02 User Manual Download Page 47

Page: 47 / 176

User M anual of Network Video Recorder

You can click the

icon to delete the corresponding key point, and click the trash icon

to.delete all

the key points.

Select a key point, then click

button to adjust the order of the key points.

Figure 4. 8

Key Points Deletion

4.2.4

Calling Patrols

Purpose:

Calling a patrol makes the PTZ to move according the predefined patrol path.

Calling patrol in the PTZ setting interface:

Steps:

In the PTZ setting interface.

M enu> Camera> PTZ> M ore Settings

Select the patrol number, and then click

to call the patrol.

Click

to stop it.

Calling patrol in live view mode:

Steps:

Press PTZ control on the front panel or on the remote, or click PTZ Control icon

on the quick setting

toolbar, to show the PTZ control toolbar.

Choose

Patrol

on the control bar.

Double click the patrol or select the patrol and click

to call it.

Summary of Contents for UD.6L0202D1275A02

















































































































































































Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands

Roline UD.6L0202D1275A02, User Manual

Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands