Roline UD.6L0202D1275A02, User Manual

Page: 119 / 176

User M anual of Network Video Recorder
119
function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the NVR is setup
in a more customized network, NTP software can be used to establish a NTP server used for time
synchronization.
9.2.4 Configuring SNMP
Purpose:
You can use SNM P protocol to get device status and parameters related information.
Steps:
1. Enter the Network Settings interface.
M enu >Configuration> Network
2. Select the S NMP tab to enter the SNM P Settings interface, as shown in Figure 9. 13.
Figure 9. 13 SNMP Settings Interface
3. Check the S NMP checkbox to enable this feature.
4. Configure the following SNM P settings:
•
Trap Address: IP Address of SNM P host.
•
Trap Port: Port of SNM P host.
5. Click Apply button to save and exit the interface.
Before setting the SNM P, please download the SNM P software and manage to receive the device
information via SNM P port. By setting the Trap Address, the NVR is allowed to send the alarm event and
exception message to the surveillance center.
9.2.5 Configuring Remote Alarm Host
Purpose:
With a remote alarm host configured, the NVR will send the alarm event or exception message to the host when an
alarm is triggered. The remote alarm host must have the Network Video Surveillance software installed.
Steps:
1. Enter the Network Settings interface.
M enu >Configuration> Network
2. Select the More S ettings tab to enter the M ore Settings interface, as shown in Figure 9. 14.